rimuovere presentation iSCSI su HP mpx100 via telnet

Use telnet to connect to the mpx100 management port, or connect to the mpx100 serial port using the HP-supplied connector.

The mpx100 management port’s default IP address is 10.0.0.1/255.0.0.0. The mpx100 serial port’s default setting is 115200/8/n/1.

(bisogna rimuovere gli initiators....(hosts))



a. To log in, type:
o User name: guest
o Password: password
b. To enable administrator privileges, type:
o admin start
o config
c. Type the command:
LUNmask rm
d. Follow the prompts to remove the Solaris iSCSI initiator from each iSCSI presented target.

For example:
> telnet 172.30.3.110
login: guest
password: password

>admin start
password: config

mpx100 (admin) #> LUNmask rm

Index (WWNN,WWPN/iSCSI Name)

—————————————————

0 50:00:1f:e1:50:00:2f:70,50:00:1f:e1:50:00:2f:7e

Please select a Target from the list above ('q' to quit): 0

LUN Vendor

—————

0 HP
1 HP
2 HP
3 HP
4 HP

.
.
.

Please select a LUN from the list above ('q' to quit): 0

Index Initiator

———–

0 iqn.2005-03.com:sanlabmac-s01
1 iqn.1986-03.com.sun:rack81-s16
2 iqn.1991-05.com.microsoft:rack77-s16.sanbox.com
3 iqn.1991-05.com.microsoft:rack77-s14.sanbox.com
4 iqn.1996-04.de.SUSE:bl7-04.sanbox.com
5 iqn.1996-04.de.SUSE:bl7-03.sanbox.com
6 iqn.1996-04.de.SUSE:bl7-02.sanbox.com


Please select an Initiator to remove ('a' to remove all, 'q' to quit): 1
All attribute values for that have been changed will now be saved.
mpx100 (admin) #>